LCDA2263C Three-phase 86/110/130 Digital Display Servo Driver

Product Overview

LCDA2263C is a new generation digital three-phase closed-loop stepper driver developed based on 32-bit DSP technology. This driver adopts a brand-new structure and control scheme, as well as a new interface solution, making it more convenient and faster for users to operate. The driver incorporates more advanced algorithms, significantly reducing the motor noise during operation, resulting in smoother and more reliable motor performance.

Features

Voltage input range: AC150V～250V Maximum peak current: 6A Subdivision range: 400～60000ppr Pulse form: Pulse + direction (does not support dual pulse) Pulse response frequency: 0～200kHz Features overvoltage, overcurrent, motor phase loss and other protection functions

Product Overview Supporting Products Data Download

Product Diagram

Terminal Function Description

(1) Power Terminal Definition

Terminal Number	Symbol	Description
1	NC	No Connection
2	U	Three-phase Stepper Motor Winding
3	V
4	W
5	PE	Earth
6	AC	AC Power Input Terminal AC 150V～250V
7	AC	AC Power Input Terminal AC 150V～250V

(2) Control Signal Wiring Terminals

Terminal Number	Symbol	Description
1	PUL+	Pulse Signal Input Terminal (5V-24V)
2	PUL-	Pulse Signal Input Terminal (5V-24V)
3	DIR+	Direction Signal Input Terminal (5V-24V)
4	DIR-	Direction Signal Input Terminal (5V-24V)
5	ENA+	Enable Signal Input Terminal (5V-24V)
6	ENA-	Enable Signal Input Terminal (5V-24V)
7	ALM+	Alarm Signal Output Terminal Normally Closed Output
8	ALM-	Alarm Signal Output Terminal Normally Closed Output
9	RDY+	Ready Signal Output Terminal Normally Closed Output
10	RDY-	Ready Signal Output Terminal Normally Closed Output

(3) Control Signal Ports

Terminal Number	Symbol	Description
1	EA+	Encoder Phase A Feedback Signal
2	EA-	Encoder Phase A Feedback Signal
3	EB+	Encoder Phase B Feedback Signal
4	EB-	Encoder Phase B Feedback Signal
5	EZ+	Encoder Phase Z Feedback Signal (Not connected by default)
6	EZ-	Encoder Phase Z Feedback Signal (Not connected by default)
7	+5V	Encoder Power Positive
8	GND	Encoder Power Negative

Alarm Handling

Alarm Code	Fault Description	Fault Handling
ER 001	Overcurrent Alarm	1. Motor power line short circuit or motor fault; 2. Driver current loop parameter set too high; 3. If the above two points are checked without error, it may be an internal driver fault and needs to be returned for inspection.
ER 002	Overvoltage Alarm	1. Power supply voltage is too high or unstable, check if the transformer output voltage is normal; 2. Internal driver fault, needs to be returned for inspection.
ER 004	Position Deviation Increased	1. Motor power line phase sequence reversed, check the sequence according to the label on the motor; 2. Loose, poor contact or broken motor power line or encoder line can cause this fault. If there is a spare cable, try replacing the cable;
ER 020	Position Deviation Increased

Main Application Fields

Suitable for various motion control automation equipment and instruments, such as: electronic processing and inspection, semiconductor packaging, laser cutting and welding, laser typesetting, packaging machinery, engraving machines, marking machines, cutting machines, garment plotters, CNC machine tools, automated assembly equipment, etc.